NV12B6FE1T Vertical Pump
$96.59
Free shipping within 3 days
Easy returns within 30 days
Shopping information security
Product Description
The NV12B6FE1T Vertical Pump from Webtrol’s NV Series is a high-quality, efficient, and space-saving solution designed for a variety of industrial, commercial, and agricultural applications. Its innovative in-line design, with suction and discharge on the same plane, ensures easy installation and compatibility with existing systems.
Constructed from 304 stainless steel, this pump provides excellent durability and corrosion resistance. Featuring maintenance-free cartridge-type mechanical seals and a standard TEFC motor enclosure, the NV12B6FE1T is built to handle demanding conditions while maintaining reliability and performance.
This model operates at a maximum flow rate of 12 GPM and can withstand pressures up to 362 PSI. Certified to meet NSF/ANSI 61 and 372 standards, it is suitable for applications such as reverse osmosis, water boosting, filtration systems, heat exchangers, and hot or cold water circulation.
###
Specifications for NV12B6FE1T Vertical Pump
| Specification | Details |
|---|---|
| Model | NV12B6FE1T |
| Motor Power | 1 HP |
| Flow Rate | Up to 12 GPM |
| Maximum Pressure | 362 PSI |
| Materials |
|
| Connections | Flanged (ANSI 150# 1.25”) |
| Certifications | NSF/ANSI 61 and 372 |
| Operating Temperature | Up to 248°F |
| Applications |
|
| Dimensions |
|
| Pump Weight | Flange: 36 lbs, Victaulic: 34 lbs |
###
###
Installation Instructions for NV12B6FE1T Vertical Pump
- Preparation:
- Inspect the pump and motor for any damage during shipment. Report any damage immediately to the carrier or dealer.
- Ensure the installation site is level, stable, and provides sufficient space and ventilation for service and motor cooling.
- Check that the pump model matches the job requirements.
- Mounting the Pump:
- Secure the pump base to a solid, flat surface to prevent vibrations during operation.
- Align and support suction and discharge piping to avoid undue strain on the pump.
- Install isolation valves on both the suction and discharge sides for maintenance convenience.
- Piping Connections:
- Ensure piping is properly sized and matches the pump’s flanged connections (1.25” ANSI 150#).
- Install gaskets on flanges to prevent leaks. Ensure they do not restrict flow.
- Remove any protective stickers or caps from the suction and discharge flanges.
- For hot water systems, include a bleed valve in the discharge line to relieve pressure during service.
- Electrical Connection:
- Have a certified electrician verify the electrical supply matches the pump motor’s specifications (1-phase, TEFC).
- Check motor wiring for correct rotation. Rotation should be counterclockwise when viewed from the motor’s rear.
- For 3-phase motors, reverse any two leads to correct rotation if needed.
- Priming the Pump:
- Remove the fill plug and fill the pump casing with water using a funnel.
- Open the vent plug’s 9mm needle valve to allow air to escape while filling.
- Close the valve and reinstall the fill plug once water flows steadily from the vent.
- Testing:
- Open the suction valve fully and partially open the discharge valve.
- Apply power to the motor and check for smooth operation without noise or vibration.
- Gradually open the discharge valve to desired operating conditions.
- Safety Precautions:
- Never operate the pump without water. This can damage internal components.
- Always replace coupling guards after installation to prevent injuries.
- Ensure the pump is properly grounded and free from leaks before starting.
Be the first to review “NV12B6FE1T Vertical Pump”
Related products
Reviews
There are no reviews yet.